The Long Rate Performance LCEP range has the thickest plates and is designed for applications where the battery is required to provide a reliable source of energy over relatively long discharge periods. Normally, the current is relatively low in comparison with the total stored energy and the discharges are generally infrequent. Typical uses are communications and bulk energy storage. It is available in a capacity range of 10 Ah -- 1660 Ah.
The Medium Rate Performance MCP range is designed for applications where the batteries are usually required to sustain electrical loads for between 30 minutes to 3 hours or for 'mixed' loads which involve a mixture of high and low discharge rates. The applications can have frequent or infrequent discharges. The range is typically used in switchgear applications.
It is available in a capacity range of 9 Ah -- 1390 Ah.
The High Rate Performance HCP range uses very thin plates and is designed for applications where there is a demand for a relatively high current over short periods, usually less than 30 minutes in duration. The applications can have frequent or infrequent discharges. The range is typically used in starting and UPS applications. It is available in a capacity range of 9 Ah -- 920 Ah.

The Small Single Cell Ranges are for general purpose applications, where reliability is a key factor, such as: switch tripping, emergency lighting, alarms and DC instrumentation.
An economical solution for your application, these optimised small capacity single cells will fit into existing cabinets, and also newly developed cabinets.
The LD P Range is designed for long discharge periods, typically 2 hours and longer and have a capacity range 10 Ah, 20 Ah, 30 Ah, 40 Ah, 55 Ah and 70 Ah.
The MP Range is designed for medium discharge periods between 30 minutes to 3 hours and have a capacity range of 11 Ah, 18 Ah, 25 Ah, 32 Ah, 38 Ah, 45 Ah, 53 Ah, 59 Ah.